Electrical Test and Tag is the process of inspecting and testing portable electrical equipment and appliances to ensure they are safe for use. This procedure confirms that electrical items comply with the requirements of the AS/NZS 3760:2022 safety standard used in workplaces across Australia and New Zealand.
The Test and Tag procedure consists of four main steps:
- Visual inspection of the equipment
- Electrical safety testing using specialized testing equipment
- Attaching a test tag to the inspected item
- Recording the test results for compliance and tracking
Electrical testing required under the AS/NZS 3760:2022 standard helps detect faults that may not be visible during the initial inspection. This makes it an essential part of the overall safety checking process.
Regular Test and Tag inspections act as a preventative maintenance service, helping businesses identify potential electrical hazards, minimize the risk of accidents, and maintain compliance with workplace health and safety regulations.
Microwave Leakage Testing is conducted in accordance with the Australian Standard AS/NZS 60335.2.25:2020, which recommends that testing be performed at least every 12 months.
While all microwave ovens emit a small amount of radiation during operation, the purpose of leakage testing is to measure the level of radiation being emitted and ensure it remains within the safe limits specified by the standard. Over time, microwaves can deteriorate due to regular use, damaged door seals, or structural wear, which may increase the risk of radiation leakage and potential health hazards.
Our microwave leakage testing service follows a comprehensive three-step process to ensure safety and compliance:
1. Visual Inspection
A detailed inspection of the microwave's external condition, including the door, seals, hinges, and casing, to identify any damage or defects that could contribute to increased radiation leakage.
2. Radiation Leakage Testing
Specialized testing equipment is used to measure radiation levels while the microwave is operating, ensuring emissions remain within the recommended safety limits.
3. Recording and Reporting
All the test results are properly documented and provided for your records. These reports assist with compliance documentation and help track when the next inspection is due.
Regular microwave leakage testing helps maintain workplace safety, protects users from potential radiation exposure, and supports compliance with Australian safety standards.
It is important to ensure that your microwave oven is properly shielding you, your employees, and your family from radiation leakage. Microwave performance can vary over time, and in certain environments some units may no longer operate at the correct efficiency level. A qualified Test & Tag technician can perform a microwave leakage test to confirm that the appliance is operating safely and producing the correct power output. This helps ensure food is cooked effectively and the appliance meets safety requirements.
Residual Current Devices (RCDs), commonly referred to as Safety Switches, are essential electrical safety devices designed to significantly reduce the risk of serious electric shock. They operate by automatically disconnecting power when they detect even a small imbalance in the electrical current flowing through a circuit. Due to their high sensitivity and critical safety function, RCDs must be tested regularly to ensure they are operating correctly at all times.
Our Safety Switch Testing service is performed in accordance with the Australian Standard AS/NZS 3760:2022 and includes the following two key tests:
1. Push Button Test
This test verifies that the safety switch trips correctly when the built-in test button is activated, confirming that the internal mechanism is functioning properly.
2. RCD Trip Time Test
This test simulates a fault condition by introducing a controlled current imbalance to measure how quickly the safety switch disconnects the power supply. A correctly functioning RCD should trip in approximately 40 milliseconds (ms) or less.
Following the testing process, a comprehensive report is provided outlining the safety switch location, test results (pass or fail), and any recommendations for corrective action if required. This documentation assists businesses in maintaining compliance with workplace electrical safety standards.
Emergency Exit Light Testing is carried out in accordance with the Australian Standard AS/NZS 2293.2:2019, which requires testing to be conducted at least every six months.
During an emergency situation or power outage in a business, school, office, or residential building, clearly visible exit routes are critical for the safe evacuation of occupants. Emergency exit lighting provides essential illumination that helps people identify exit paths, avoid obstacles, and safely navigate through the building.
Our Emergency Exit Light Testing service includes the following procedures:
1. Visual Inspection
A thorough inspection to ensure the exit lights are clearly visible, correctly displayed, and installed in appropriate locations.
2. Battery Discharge Test
Testing the emergency battery system to verify that the light operates correctly during a power failure and maintains adequate illumination for the required duration.
3. Cleaning and Maintenance
Removal of dust, dirt, or other materials that may reduce the brightness or effectiveness of the lighting.
4. Reporting and Documentation
A detailed report is provided for your records and compliance requirements, including test results and reminders for the next scheduled inspection.
Businesses, schools, and workplaces are responsible for ensuring that emergency exit lighting systems are properly maintained and fully operational in order to meet their Work Health and Safety obligations, including their legal duty of care to occupants and visitors.
Regular inspection and testing of fire safety equipment is essential to ensure it remains accessible, operational, and effective in the event of a fire at your home or workplace.
Fire extinguisher testing is carried out in accordance with the Australian Standard AS 1851:2012, which requires routine servicing to be completed every six months. These inspections help ensure that fire extinguishers are fully functional when required, helping to minimize the risk of damage to property, equipment, and most importantly, protecting lives.
During our inspection process, we conduct a thorough visual assessment that includes checking the following:
- Accessibility and correct positioning of the extinguisher
- Mounting height and condition of mounting brackets
- Safety pin and tamper seal integrity
- Condition and clarity of labels and instructions
- Pressure gauge readings to ensure correct operating pressure
Once the inspection is completed, the fire extinguisher is tagged with a service label indicating the inspection date and reference details. All inspection results are also recorded in our system for compliance tracking and future servicing requirements.
Maintaining regular fire extinguisher inspections ensures compliance with safety regulations and provides peace of mind that your fire protection equipment will operate effectively in an emergency.
What Fire Blanket Testing Involves
All fire blanket inspections are conducted in accordance with AS 1851:2012, the Australian Standard for the routine service of fire protection equipment. During each visit, our technicians perform a thorough assessment of your fire blanket's condition, accessibility, and compliance.
Key elements of our inspection include:
- Physical condition: Ensuring the blanket and its container are free from damage, contamination, or obstruction.
- Accessibility: Confirming the blanket is correctly folded, easily reachable, and clearly identified with proper signage.
- Compliance action: If any issues are identified, our team will notify you immediately and can arrange replacements to maintain full compliance.
After testing, each blanket is tagged with a service label and recorded in a detailed compliance report, providing proof of inspection for audits or safety checks.
Who Needs Fire Blanket Testing
Fire blankets are required in many commercial and industrial environments, particularly where cooking or flammable substances are present. Businesses that typically require regular testing include:
- Restaurants, cafés, and takeaway shops
- School and corporate canteens
- Commercial kitchens and food trucks
- Aged care facilities and hospitals
- Industrial sites and workshops handling flammable chemicals
Workplaces exposed to Class F fire risks, such as cooking oils, must ensure fire blankets are tested at least every six months. Failure to comply can endanger staff and result in regulatory penalties.
Testing Frequency
Under AS 1851, fire blankets must be inspected every six months. Additional inspections should be carried out if:
- The blanket has been deployed during a fire
- There are signs of wear, damage, or contamination
- The container has been tampered with
- The blanket has been improperly folded or repacked
Our team ensures that fire blankets are always accessible, correctly maintained, and ready for use in an emergency.
